All Activity

OK, what you have to note here is the 6561 is a 256 byte x4 whereas the others are 1kb x 4 albeit they have the same footprint. You can tell the smaller RAM machines as they have a 74LS03 instead of a 74LS12 for IC24. These are most likey to be MOD 1 and possibly 2, 3 and upwards use the larger RAM. There are others though that have a daughter board with a 6116 chip and this either plugs into the existing RAM sockets or is soldered directly to the board. You can make your own daughter board up with the 6116 chip (or equivalent) as these are easily obtainable and cheap.

Hello everyone Already, I have corrected the previous resolved topic because in thanks, I forgot to mention Northstar. 🙄 Well, here I am back for a new MPU3 episode. I'm anticipating a little. It's about 6561 RAM. Difficult to find or at exorbitant prices. In the diagram, we see different possibilities. 4334-6514- or 8414 but it is also specified 6561 for version 14600-2. I saw on a video the MWS5114 mounted in place. I also saw a single chip on a small circuit. Nothing seems to match in the data. What can be substituted? with or without modifications. THANKS.

Scorpion 2 same cabinet as make a million etc same sort of gameplay

What tech is it?

Good bag. Top machine that

Thank you, was described as not fully booting but worked previously so hopefully complete and not falling apart

The bit we can see looks ok, lets hope she is complete. Keeping my fingers crossed for you 🤞.

Delighted to say I bagged this beauty recently! I only had one poor picture to decide in a very short time if I wanted it, good news is a courier has collected it for me and I will probably have a few weeks wait before it arrives! So we can all see together if it was a good buy or not. This was my guiding picture!

@MattyL I could dump the S60 and S61. I would be happy if you have the 1-1 for me?

Isn’t it a re-glass? I can’t remember what the original was if it is, but I’ve got a feeling it’s a clone of another game

Have had the missing button decals redrawn by Mikonos, and the glass graphic has been printed and is on it's way to me, thanks to Mike for supplying good images of the buttons

Hello guys im and loving the old slots. They bring me back to when i was young in Butlin's haha.

Hello guys im and loving the old slots. They bring me back to when i was young in butlins haha.

Merry Christmas

Far too early. Come back on 25th!

Brilliant stuff ,they look jist rhe ticket .

Merry Christmas Richie to you and your family and all the best for 2026

Things have kind of ground to a halt, as we’ve had a lot going on recently, family wise. Hopefully make some more progress in the near future.

Nice... they look perfecto 👌

I designed them on Tinkercad and got a local guy to print them. Tinkercad is really fun. Big thanks to MattyL for the heads up.

Are you 3D printing those Pete?

Well this is my latest project...it's been fun making the lamp masks

Hi, Does anyone have any documentation on this machine? Thanks Alex

Hi everyone, I'm new to this world. A friend of mine just gave me a fruit machine that definitely needs repairing. It has a Scorpion 2 engine.

Here are the new lamp holders 👍👍👍