Leaderboard
-
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
[[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
Popular Content
Showing content with the highest reputation on 07/11/19 in all areas
-
Cool leave it with me guys2 points
-
Right on to that cab fault. Look at the pictures below and you will see the fault. This is the 50p reject chute(this must have had coins resting on that ledge at some point) The Blue arrow is the approx position where the hole should have been. As can be seen the hole has been cut about 2 inches too close to the front of the machine and the red arrows show an actual hole on the front of the machine.(the coin tray has been removed) As said above how this passed QC i will never know. The pic below shows the extent of the damage with the reel shelf removed(the orange masking tape on the outside of the machine shows the hole. So i needed to fill and shape the hole so coins will fall into the coin tray. Then paint the filler. Looks better now from the outside. Now do some testing.2 points
-
And that wiring is bad, loose braid, unsoldered pins... needs some care2 points
-
I'll let you have some!1 point
-
Will have a look over the weekend, it should take standard 20p tokens, if not you will need to get it updated to take them1 point
-
I have plenry 20p tokens1 point
