Leaderboard

Maygay - Living in America Tech M1 - Rom revision 1.1 Its time to nip over the pond for a trip around America with this rare machine from Maygay. Some say it's very rare machine and some say it was a failed test, whichever it is I have no idea. Thanks goto: Wizard (RIP) for MFME M1ajay for the roms and flyer. Living In America.zip

All finished now and ready to go in my small arcade room. As you know through the earlier posts i have sorted out the mpu faults and got it all running. I also fitted new bearings to the reel deck in the end and converted it to take the new-new 10p (adjusted the mech, removed the magnet and fitted a new payout tube), and it still uses tokens. On a side note i could not believe the mpu still worked as i had it in pieces so many times whilst doing the schematic. All that was left to do was sort the cabinet...... Removed the old base which was glued and screwed on (bitch), built and fitted a new one...... Filled and sanded the top and sides, several coats of pva in the (weetabix) T moulding groove ready for new moulding. Glued a cat to the top of it 🤣 Also moved the token refill keyswitch from the top to the bottom front (god knows how many pints were lost down the back of the machine in its life). Replaced the old flourescents with led lights. Then fitted vinyl wood effect to the top and sides and new t moulding (i know the stick on vinyl is not very hard wearing but it is not going to be abused) Finished!!!!!!!!!

For anyone reading this in future, as stated above by MattyL. I swapped the very end red pin for and placed it in the next available empty slot (next to the grey on my picture). Issue solved. Thanks all for your input.