Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. STORMTROOPER

    Barcrest Super Bucks Fizz

    Looks interesting. Thanks.
  3. Today
  4. Andrew96_

    Some reels not lighting up? MPU5 4 Reel

    Reel lamps are done from that reel board
  5. AdrianE

    Some reels not lighting up? MPU5 4 Reel

    Yep all transistors looked okay on the multi meter (main board). Can’t remember looking at the reel boards so that could be a next step to try on a rainy day.
  6. stevedude2

    1993 Pink Panther machine.

    Nice to see a blue Pink Panther again. Used to love the Eurythmics hi/lo sample 😀
  7. lammas10

    1993 Pink Panther machine.

    Never an easy fix on m1 machines. Best of luck though.
  8. Andrew96_

    Some reels not lighting up? MPU5 4 Reel

    Well as long as it looks ok it must be ok then, you must be better than me as I have to find faults with a meter as I cannot see bad transistor internals just by looking, reel boards so fail on mpu5
  9. Andrew96_

    1993 Pink Panther machine.

    Not working = expensive and not easy to fix or find someone to fix the main mpu , time consuming and worth what it is worth to you
  10. AdrianE

    Some reels not lighting up? MPU5 4 Reel

    Thanks everyone. Got one reels lights working, loose pin connector that was only found by luck by changing over the reels between 1&2. I also broke it by replacing the pin connector one across. Had to dismantle and realign the pin that had been pushed out and working again. The top feature reel still isn’t lighting up but it’s not a major issue. Have tried testing the board and all looked okay.
  11. riche100

    1993 Pink Panther machine.

    yawwwwwwwwnnnnnnnnnnnnnnnnnnnnnnnnnnn
  12. Sorry, missed your original reply.
  13. If you get chance would you be able to scan / take a clear photo if possible please.
  14. RobboWolves

    1993 Pink Panther machine.

    Not working unfortunately. I’m picking it up at the weekend, hopefully an easy fix 🤞
  15. lammas10

    1993 Pink Panther machine.

    Does it work? as working M1a boards are becoming impossible to find. The same goes for finding someone to fix one, that's if its even repairable. The battery leaks and causes a lot of damage.
  16. I installed all the elements but without the memory battery. Sound works but nothing shines. The door opening alarm is also triggered. I have no ideas what to do next. 🤔
  17. RobboWolves

    1993 Pink Panther machine.

    Looking to buy this machine from a friend. Any idea what it’s worth these days? Cheers fellas
  18. riche100

    Windows XP

    Hello and welcome
  19. Pow26

    Windows XP

    Thank you. I’ll give it a try.
  20. frig

    Windows XP

    For XP you can only use pre v19. I think the latest version that ran on XP was 6.1. https://www.desertislandfruits.com/forum/index.php?/files/file/116-mfme/ It may also be in the MFME section on here?
  21. Hi Folks running a touchscreen with XP. What’s best to use on XP? I’ve tried using different MFME with different errors. Any advice greatly appreciated. Regards
  22. Yesterday
  23. yes you can run the machine with out the battery on it you will get a error 53 then it will boot up
  24. By mistake, I called the regulator a transistor. Sorry mistake 😁 Today I replaced the capacitors on the motherboard and in the power supply, but unfortunately they were of a different size and I had to make changes. I hope that this is not a problem. I bought a 211 resistor 2.7r 0.5w, not as originally 0.25w, there were no other in the store. I think it will be ok too? I still have to buy SW1 switch. There is a spacer between the regulator and the heat sink that I need to buy. I have a question, should I put thermal paste between the plate and the heat sink? I think that for now I will mount the motherboard and check if anything turns on. This will give me an egergy for further work. I just don't know if I can run the machine. there are two keys on the front. I don't know what they are for. I don't have a battery and I wonder if I can run the game properly without it. I wonder what to buy.
  25. colinjackson1990

    CJ

  26. Ferrrie

    $_84.jpeg

    This demolition company wants to renovate
  27. niftynudger

    Red Dwarf emulation now possible?

    Wow what a nightmare all the best 96!
  1. Load more activity
×