All Activity

Afternoon Ron, I will take a look, hopefully it will be a simple as hoped! Thanks for the reply 👌

Unless they have burned out, They normally de-solder/break under the bridge to the spade connectors. pull out the two brass securing brackets and remove the coil, it's just wound with tape so easy to access, with the tape removed you will see any breaks and easy to repair and cover the coil.

Good afternoon all, Has anyone successfully repaired or had repaired an old 50v solenoid at all? I would be interested to see if it is possible? I have had a couple go recently, let me know. Thanks Mike

Sorry can not help you. Nice looking machine. Lots of success finding your rom.

Hi all , I purchased this machine a few days ago and it’s on 5p play £6 jackpot , the person who delivered the machine said there was a hacked rom available where you have not got to replace the security chip for 10p play £6 jackpot , does anyone know please if these are available please ??? Many thanks , Craig

Another new machine jackpot , machine number 6 to the collection. converted_13.mp4

Had an account here many years ago and just wanted to drop by and see if I can get MFME and some ROMs up and running again!

Ah thats more like it .cheers for the vid 👍

Hopefully should now converted_12.mp4

Sorry to say but the.link doesn't work

Hyper viper jackpot all cash on 5p play , machine number 5 IMG_1291.mov

Hello all, new member here form Ireland. Have accounts on the other popular MFME sites, though they seem to have broken links or errors so getting the files is almost impossible. Hoping to have better luck here and relive some memories of the machines I used to play growing up. Hope everyone is doing well. :)

Nice result matty well done for getting this back from the dead

I finally got this finished! It was a difficult one as I was only getting the odd 20mins at a time to work on it. I had a faulty replacement 6821 with no scclock output to the alpha... I initially swapped this but swapped it back when there was no improvement, but found it later when I came back to check it with the scope... I ending chucking this mofo 6821 across the room. The original alpha had a dead FET but no hole in it like usual. Which is 95% the tell tale sign...on the 12v ones anyway... My spare alpha had an issue where it wasn't internally Resetting... even though the reset from the 6821 was good. On the first boot with it, it always stopped the whole machine dead from coming out of reset... nightmare! I sussed out what this was by unplugging each plug on the board to see what area the fault was. With the alpha display unplugged it booted perfectly every time. The second boot with a new 6821 and the reset fault display worked flawlessly- any other resets or door closes after that and it was just garbage on the alpha display. 3 separate issues all in the same area! I recapped and changed the FET on the original alpha and presto it finally works... resets nicely and displays perfectly every time.

Hello, and welcome to the forum. There are many good people on here.

have been told it boots up on 0.01 but get comms error but plays in free play but the head and slaves wont boot on anything else im wondering if wires are plugged in differentley on comms board as that 0.01 was copied from someone else machine

Hi have passed on info and looks like slaves can see the i d but its refusing to boot up do you know what software file is needed as the one in the photo will not work cheers again toddy ps its for £25 jackpot

many thanks have pasted it on cheers

IO3 ID Plugs.pdf see attached, if anyone has IDs for 4 onwards, let me know

sorry for late reply digby yes its 92 chips hes after as they dont use the id plugs he know has a set off 94 chips but uses id plugs so needs a photo or a set up of id plug 2and 3 slave one is a worker but 2 and 3 id plug uses diodes many thanks for all your help

Alright sas… Pete.

Hello, i want to change from a noob to a fun player. 👋

hi guys,quick intro,long time player /nerd of fruites...Help Chris217 with his facebook page,pretty well known amongst the community Nice to meet all of you x

Hi Mark and welcome, what machines do you have ?

just trying to find fellow fruit machine enthusiasts i have repaired and played for nearly 30 years and have 3 at home i would have more but the wife might cry