Jump to content

Leaderboard

    [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template core/front/popular/memberRow is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Popular Content

Showing content with the highest reputation on 03/08/19 in Posts

  1. If i didn't know any better i'd say you were Eastenders in disguise. He disappears and you have arrived in his place. 😆
    2 points
  2. Also that the reel mechanism is fully inserted and that there are no pins pushed out of the connectors on the back of the mech and in the cabinet. Do a visual inspection of all the relay contacts in the machine as bent/missing/badly adjusted contacts are a usual source of issues with these machines. With a two plays per coin machine there is a mechanism on the side of the reel mech near the timer which should trip when a coin is inserted and then step back on each pull of the handle
    2 points
  3. Great capture rich and a delight to watch .another interesting bit of programming is that it pays out in 50ps once the bank is over £5 despite this machine having a really long 10p tube .a nice touch and for my money a far better machine than smash and grab .also can go a few repeat s on the clockpot which is nice .
    2 points
  4. The IRQ signal passes from the board through the card and back onto the board, so check the pins on the connector to make sure none are bent, Also check for continuity between these two pins on the card itself.
    2 points
  5. Hey all, I need your help again! I've started up the Rock On and I have an alarm error after 1 game. I've checked all the spade connectors and all looks ok and connected, but the token slot seems not to work or register. When a token is inserted accepts it but no game play nothing. Checked the other slots for the 50p and 10p and fine (for one game) then it looks up with the alarm. It's odd, as the other day when booted up all was working, but now its not. The video is of the alarm and lock up, I'll do another of the token tomorrow but just wanted to run this one by you all if you have any ideas? Thanks all as always much appreciated 20190220_192113.mp4 Rob
    1 point
  6. Happy days Had the reels out checked all the connections and everything put it back together now working sweet as. Thanks for the help. Darren
    1 point
  7. Better video, & last post, ill take it over the old fruity projects once it starts. But had a little go last night, and it played like i remember in the wild. this is why we loved them back then. may have been 10p may have only had 3JP. But Enjoy Just cant bend to get the coins out the tray hahahhaha video-1552035763.mp4
    1 point
  8. Thanks wizard had a look and sure enough 2 pins bent one at either end of card I'll try it now I've straightened them out when I get home cheers
    1 point
  9. Hi Ramon here's the ones you mention - (thanks to whoever dumped these ) Dave. Nudge Up (Barcrest) [Rom].zip Top Action (Barcrest) [Rom].zip
    1 point
×
×
  • Create New...