Search the Community
Showing results for tags 'jpm'.
-
Hello, Just given my JPM Casino Crazy a quick clean up. It all works !!! It has a ME115TS with the orange £2 adapter attached. Obviously the new £1 means i'm going to have to send it away for reprogramming, but I also want to remap the coin routing. Does anyone have the pinout for the 18 pin routing plug? Thanks in advance.
-
Hi everyone im new to this forum so bear with. I have a jpm casino 5liner currently having my boards tested and found that I need some new game eproms. Do they have to be the same or could i use different ones
-
Hello, I'm already a member for 5 years, but i only read a lot of post because i like it. I have been in the car electronics in The Netherlands for 20 years but i like 230v elektronica more. I have several machines mystelf: JPM: Popeye, Barcrest: Graffity, Eurocoin: BAR 7, Astra: Game of fortune, Barcrest: Roadrunner 2 but i need some help. I hope to be in contact with you all soon.
-
Hi all Looking for a JPM lite a nudge mk3 or each way nudger mk3 Anyone selling or know where to look? Thanks
-
Hello all I was given some advice and told to join in order to find the above.. Ideally I would like a Lite a nudge & each way nudger.. Is anyone selling one or can anyone point me in the right direction? Thanks in advance James
-
Hello All I have been offered an each way nudger which I have been looking for ages... Its been stood for 6 months apparently and works fine but apparently is making a buzzing noise... Any ideas, is this likely because its been standing, unused etc? Any advice would be appreciated Thanks
-
Hello everyone Ive managed to get hold of my JPM EachWay nudger which im over the moon about but im still on the look out for a lite a nudge mk2 or mk3 Please me know if you know anyone whos selling one... Thanks James
-
I'm from Holland and own the slotmachines Goldrun, Top Deck, Twentyone and Reel Cash. Next to that I own some Williams pinball machines.
-
Hi everyone, I'm looking to purchase a JPM Lite-a-Nudge Mark 3 but can't find anywhere that has one for sale. I know the Mark 2 is just as good as the mark 3 so either one would be amazing to own. If anyone has any contacts or know of someone who has one for sale, could you let me know please? Thank you kindly
-
-
-
My latest addition to my collection is this JPM "Play Bingo" £150 Jackpot Essentially a higher jackpot version of "Reel Bingo" which was £60 or £100 jackpot As you can see, it was filthy when I picked it up yesterday. I have given it a "stage 1" clean. Buttons to come off later for a proper clean. There were no keys, so had to drill the locks and I was suprised to find it as a front opener. I have 3 others in this cab and all are rear openers Love the way it opens in 3 parts and easy to get at everything. Why did they abandon this method? Reels need cleaning. One has come "unstuck" but is not damaged. Bonus in that there was half a tube of 10p's After cleaning (Pic 4) I am pleased to report the glass is superb, lots of chrome detail in the artwork and it has not corroded at all The metalwork is pitted as usual, but is good enough for me Slightly annoying that it only holds £120 in pound coins, then pays 50p's, the later machines I have have 2 x pound coin tubes. It also means I have to ensure I fit a mech that takes 10's and 50's. I can mod it and fit one of the longer tubes I have spare, they are about £150 capacity. I did that on my blackjack club and it pays £148 in pound coins now! First "proper" job will be to replace the rifa's in the PSU and check the board - will do that after me dinner! Phil.
-
Well, I was kindly donated this machine last year by a member here but have just not got around to doing anything with it! So here it is - currently on £75 jackpot, but I will be looking to make new decals to make it £100 or £150 if it can go I can't find a switch to change it (My other MPS machines have a seperate switch), so it may be dip switches. It came with a PSU that needs repairing, but no board (MPS2) I have come by a couple of boards that I have tested and they work, so that is sorted Needs a good clean first as it was originally in an outside shed so covered in all sorts of stuff
-
Hi has anyone here have a jpm impact 3 working board for sale i also need a jpm power pack or if you know where i can get one from will be great can collect if needed thanks
-
i have a sys80 board type pcb no. 602019 b. System 80 cpu / 8 k memory with a leak battery. now i can buy a board with sys 80 cpu/14K. this board has the same connector but will this work.
-
Hi all, Are the red and metallic grey JPM power supply units found in Impact era machines interchangeable without risks? My older machine contains a RED PSU, which initially came with a 045265 impact motherboard, but now operates with the 045266 motherboard - because i didn't know the difference at the time! My ever so slightly younger machine contains the GREY PSU also working with the 045266 motherboard. The label and pin-outs all appear to be identical, and they have proved to be interchangeable on the face of it, for now, but there must be a reason JPM changed the colour and [i think] model number of the PSU. Higher power rating or reliability perhaps? Anyone know the reasoning? Cheers, Paul.
-
Hi all, Have recently aquired a JPM impact BIG BUCKS machine with the £4 jackpot decals. I don't remember seeing these prize values in the wild before, always £8 or £10, so quite a novelty for me. But being a collector I'm looking for ANY other set of decals for this machine! Has anyone broken one up or have spares? Ideally I'd like to run it with £8 jackpot all cash @ 20p or 25p per play (higher the better). It's just the insert at the top showing the top 3 wins, like this: 3x Big Bucks = £8 repeat Red 777's = £8 Blue 777's = £6 Any advice or leads appreciated. Have a good new year. Paul.
-
Hi All, Picked this up recently, usual battery damage on the impact card. However, 6 wire links and 2 capacitors later, it booted!! Problem is - it is on £10 jackpot and the decals with it are £8 or £15 I have tried a stake/prize key and any setting other than "all off" gives error 55 which is "invalid game mode" I have burnt and tried the roms on the emulated version and they are the same - £10 only Does anyone have the switchable roms please? By the way, is the repro down, havn't been able to get on for last 3 days? Oh and I can't upload photo's either!! Ta Phil.
-
Okay, so I got a Turbo Joker (dutch version). The problem is, some lights will not go on, I replaced the lights and measured the Volts and I do get Volts (10, 11V). Because this is a multiplexed system which I do not know much about I would appreciate it if someone can explain to me what this multiplexed light system do. The game runs perfect, but there's just some lights that won't lid up. These won't light up: - One from the Bulb score (big score screen). - Several ones in the bottom Glass and some in the Top Glass. The pay out button is the same as the Start / gamble button? Because if I put it in maintenance mode (open the door) I must press the pay out button and it SHOULD go in the test environment, but instead it runs like the gamble button which will spin the reels of course and if I keep the pay out button pressed it goes in the test environment after the reels are spinned (1 gameplay). If anybody of you can provide me with a schematic of the System 5 mainboard and other technical stuff I might be able to solve this problem, because the bulb in the top glass is controlled by a TIPP116 transistor which gets random voltages if random lights go on while the max base voltage is 5V. That confuses me a lot. I'm from Holland, so my English won't be that correct. I hope somebody can help me with this. I did find the technical manual of the system 5 on the net, but there's not a wiring diagram in it of the PCB itself, only the coin PCB's. Again, if anybody can help me with this I would really appreciate it! I spent almost 2 months looking for any technical data and the only thing I found was the manual. There is just not much around from this PCB on the web. Or I used the wrong search engines. Hope anybody can help me with this problem. The machine works 100%, just the Pay Out button and some lights are the problem. I want to make it original again with all lights, systems, coins working. Thank you in advance! Wcool93 -
just picked this up this morning all working and now could do with a good clean. wiring diagram all included will upload soon.
