Leaderboard

Dodgy French switches that is 🤣🤣

Sorry Jimxxx; the translation isn't working properly. I don't understand. Also, you told me to remove a wire; I did, but I didn't realize it. There are times when I deserve a slap. Thanks

Hello gentlemen. Well, once again, I must apologize profusely. Unbelievable. In the photo, you can see three switches; something should have caught my attention; what? The color of the middle one is black; unlike the others. I took it apart twice; tested it twice: open, closed; closed, open... OK. They are all connected the same way. So, it didn't seem strange to me. Besides, on the schematic, you can clearly see they are open. But even stranger, I didn't change that. So, with the T56 error (see above) and now the switch, I expect more surprises. And I will have some, on the tube matrix, for example, and surely others... Luckily, you're here. To point out my mistakes. Sorry again. HOLD issue fixed. The tube and sound issues remain. Thank you for your help.

Welcome Sean, Great machines you've listed there, and I think we would all love to own at least one of those. 2p machines from that era, are very rare, and command a high price. There are a few members on here, that might point you in the right direction, of trying to find a good 80's machine. Well, from Chorley, you have Red Rose, plus Retro Fruits / Reel Fruits in Blackpool. I've only been to retro fruits, and I could spend a week in there, very easily. I was local (Liverpool), but currently living in Celina Ohio. I've got 2 machines over here. a Duff Beer Guide and a Big Brother. I'd like to have some 10 JPM machines such as Impulse, Roller Coaster, Monopoly, but the cost of shipping and now tariffs, is not an option currently. Welcome to the forums, we are a pretty relaxed crowd here. Regards Statto

Hello experts So, Bob is right. I installed the wrong component: T56. 🙄 I was really incompetent. This board has already been repaired, and the previous owner installed the wrong component, BC172. I always check the component and the schematic; and on the schematic, it's a BC172. Hence the mistake. Now it starts; yes; Bingo! 🙂 😀 Thank you; thank you again. But, well, there are some problems: The sound; I'm going to replace T11. The display is acting up a bit. One scroll bar is stuck in HOLD mode. And others... I'm going to check the connectors, the soldering, etc. Thank you very much.