Jump to content

PCP Cash Attraction - Next Project incoming....


PCP Fan
 Share

Recommended Posts

Thanks rich, as always :)

you haven’t got any of the chrome bezels off a blue streak style cab anywhere have you? Don’t mind even if they are covered in paint as I’m going to chrome them up!

Link to comment
Share on other sites

Turned on. Dead. Replaced board. Fired up. Rifas smoked away outside garage then sat stable. Lights turned off after a few seconds of running so at that point I stripped it down and started work on paint etc. 
 

will rebuild and test after it’s clean :)

0E7B81CB-9E63-48E6-BBF3-35301F348661.jpeg

F05AF433-73FF-427B-AC6D-B80F679070A8.jpeg

0D9F88DD-9E48-49A9-89A4-078055DB9CA8.jpeg

3FB6062A-019F-4DC5-A1BF-C611F49F4FD9.jpeg

D0A6C0C0-3CD2-4EB7-84DB-A09A1FBCF37A.jpeg

7077E745-EABA-4FF1-83DE-FAA7C74AD046.jpeg

2AB5A0E1-6D2E-4AE9-BB76-4413223AA82E.jpeg

592A9E17-37A7-47C9-B6CE-4F7296F6F93E.jpeg

DA614474-EFD1-49C2-89DF-49959C2FCCD9.jpeg

8E422B79-D7B1-4198-9C6C-267179920673.jpeg

34052964-558F-40C5-A4D2-55F6D0EA4CB6.jpeg

52E23391-D5C5-4E80-A0DE-D50F56517E8C.jpeg

C56B8699-E56B-4096-8DCC-20F153307A85.jpeg

9AF46252-1CBD-4627-8342-8A83FB2011E9.jpeg

99B6D24C-9F92-4864-B0B1-3890C39239A7.jpeg

ACC4A8E3-0B07-4F93-BD4F-A7AF455B9035.jpeg

79A2B86E-DD1E-40A6-87C3-C491F4583F3F.jpeg

  • Like 1
Link to comment
Share on other sites

So it’s had the tube changed and new starter, white and no flickering. 
 

buttons all ripped off and metalwork been sprayed twice today so should be dry tomorrow. Need to change the bulbs and test before blocking them all away again behind mechs then see if it runs without any errors.......

Link to comment
Share on other sites

Does anyone know if we have paperwork for this - switch positions etc as the board wasn’t set the same as any of my other machines. I suspect it is inhibiting payout of 5p coins as a screw was blocking the mech?

Link to comment
Share on other sites

I have 2 days a week off and today I’ve spent 6 hours on it. Tomorrow I’m half day as still half furlough so will hopefully get a bit together :)

want the main frame back together now it’s painted as glass not held in 😕 

its all ready for a rebuild I hope in 24 hours. Paint dependant. :)

 

Link to comment
Share on other sites

Well after a few days of work / life chaos fresh Louie fixed board installed and Rifas had a good smoke......

until the weekend it’s running. Next for more cleaning now paint sorted and bulb fixes. :)

 

F8753F78-3D43-44F5-B2F4-E9A3728EDE6B.jpeg

771943A2-30EB-42E1-A170-FCD898CCE2AD.jpeg

  • Like 2
Link to comment
Share on other sites

Lots of dust, dodgy paint and blown bulbs. Seems like they are all the same :)

there will be faults now but once it’s running it’s 80% there. Coin mechs etc could be an issue. Will have to see over weekend. Watch this space ;)

 

  • Like 2
Link to comment
Share on other sites

12 hours ago, Amot said:

I can help if mech needs programming m8

It does mate, it needs updating to take old coins and give out £50 notes if you could sort it 😂

Ill have a crack at it over weekend and see what it takes :) 

  • Like 1
  • Haha 1
Link to comment
Share on other sites

I’ve flicked switch 8 for test mode, it enters test mode and starts going through numbers on credit display. 
 

ive stopped it on them and got solenoids to fire etc but I’ve totally forgot how to make it flash all the lamps! 
 

please someone remind me it’s driving me mad 😂

Link to comment
Share on other sites

Well I worked out the test mode, done all the bulbs. Put reels in plays spot on. 
 

put coin mech in but it won’t take £1 coin. Takes 10p nothing more. Don’t know if I’m missing something. It did take one £1 coin and fired solenoids as of giving change but that’s the only one it took. I pulled it from the tube and have tried putting it in over and over but it wont have it again. 
 

tomorrows job messing with mech. 
 

another question will the machines take newer mechs? It’s a 111 and I’ve got some others can’t remember what they are :)

  • Like 1
Link to comment
Share on other sites

1 hour ago, PCP Fan said:

Well I worked out the test mode, done all the bulbs. Put reels in plays spot on. 
 

put coin mech in but it won’t take £1 coin. Takes 10p nothing more. Don’t know if I’m missing something. It did take one £1 coin and fired solenoids as of giving change but that’s the only one it took. I pulled it from the tube and have tried putting it in over and over but it wont have it again. 
 

tomorrows job messing with mech. 
 

another question will the machines take newer mechs? It’s a 111 and I’ve got some others can’t remember what they are :)

Hi Barrie

Ive got updated MS111, ME115 and ME126 mechs if you want to try any of them all on new coins.

Might also have them on old, but will need to check.

I can drop them in at the shop on Monday or you can collect from mine.

Offer is there if needed pal 👍

Link to comment
Share on other sites

 Share

×
×
  • Create New...