Leaderboard

Lol

Please

Sure :). So long as those ROMs work im well happy.

They do run in the emulator, change button 5 to a checkbox and tick it along with buttons 12-15 and tick them, would it be possible for some hi-res photo's so I can make a layout for it please.

As CanonMan says to take on just one board and especially with no info, diagrams etc, it's not for the faint hearted. I would offer but I've still got far too much on at present. Depending on how much of a hurry you're in maybe in a couple of months if that's any help.

Schematic now in downloads. https://www.fruitemu.co.uk/ib/index.php?app=downloads&module=downloads&controller=view&id=1772

Chloe is doing her classic first when got round to bud. Zippy🤐

@PlayerThey are spot on thank you

Any chance a cherry can be put on top John? Zippy🤐

These any good??

On this already John, got plenty of the old lights on lights off. Zippy🤐

E/m pinballs can be very hard to fix,especially William's systems 1 through 7.the mpu and driver boards fail especially the long interconnector that joins the 2 boards.at the age they are it makes sense to replace the boards with one board that takes place of the 2.but they are £300 and the displays are approx £180 each.also known to fail and fry.as for solenoids etc plenty about.just be very careful what you get and pay.like six million dollar man had six displays,over the top and not needed but William's had loads to use up and made games to do just that.it can be very expensive and a big headache ,that's why I stopped doing them,I only do 1991 on with dmd display.better games and easier to fix and get bits.also remember that it's a centre wound transformer and not a primary and secondary as modern stuff is so even the 6 volt output will give you a kick if taken to ground.do your homework very well before you buy,I know.good luck.