Jump to content

Recommended Posts

Hey everyone.  I am Henri, 49 years from Holland and i'm on a mission to ressurect as many Dutch BFM,JPM, Barcrest etc machines as i can !

I buy them, (try to) fix them, play them ( get into their AI hahaha ) and then sell them again. I have a mancave in my garden with these machines, a PS4 racing simulator

with steeringwheel, seat etc and offcourse some good speakers for background tunes.

At this moment i have the SuperFlushSE, Oracle and JPM Goldenstreak. For this last one i am looking for a new motherboard. The one thats in

it now looks prestine, thats the strange part, battery located next to mpu, but the reels are not working correct. Changed them out but same issue.

Reel 1,2,3,4 centre correctly and reel 5 and 6 end up 1 step later then centre (?). So if anyone could help me out with tips or even an Impact 3 mpu that would be

great !!!!  

Mancave.jpg

  • Like 2

Share this post


Link to post

hello and welcome

Share this post


Link to post

welcome. I like the JPM electra cab. I have one of those and am looking for a replacement plastic panel that goes under the buttons the full width of the machine.

Share this post


Link to post

Hi! The reels are usually adjustable with a screw so you can rotate them for adjustment... have you tried that yet? You're actually moving the position of the optical sensor relative to base of the reel. Hope that helps you

Share this post


Link to post

Hey MattyL. Thanks for your reply. I know how to adjust the reel position, so you think adjusting the position/timing can help with the reel not " skipping a beat"

like they do now ? I believe now, when the optical sensor the "pointer" is exactly in the sensor is, the JPM logo is exactly in line. so when i allign reel 4,5 and 6 and then

do a position reset, reel 4 comes back to this centre position ( 1,2 and 3 are also centered ) and reel 5 and 6 are one step past centre position. ( And display says e80 reel loom error.)

grrrr. I'm determined to fix this one to, i really want to play the game. Won't rest till it works hahaha. Would there be a way to get an Impact 3 mpu on that side of the water ?  In Holland it seems impossible te find one, and these mpus are not popular to repair.   Many thanks in advance !  

Share this post


Link to post

Or where should i post my request for the Impact3 Mpu on this forum exactly ?  I'm a dummy when it comes to forums haha i just want to fix my GoldenStreak machine. :):)

Share this post


Link to post
3 hours ago, FlyingDutchMan said:

Hey MattyL. Thanks for your reply. I know how to adjust the reel position, so you think adjusting the position/timing can help with the reel not " skipping a beat"

like they do now ? I believe now, when the optical sensor the "pointer" is exactly in the sensor is, the JPM logo is exactly in line. so when i allign reel 4,5 and 6 and then

do a position reset, reel 4 comes back to this centre position ( 1,2 and 3 are also centered ) and reel 5 and 6 are one step past centre position. ( And display says e80 reel loom error.)

grrrr. I'm determined to fix this one to, i really want to play the game. Won't rest till it works hahaha. Would there be a way to get an Impact 3 mpu on that side of the water ?  In Holland it seems impossible te find one, and these mpus are not popular to repair.   Many thanks in advance !  

You sure the motor isn’t faulty?

Share this post


Link to post

Thanks ! I'm not sure. Problem is that inside the cabinet all error codes are specified, but e80 reel loom isn't 1 of them grrrr. This evening i am picking up 6 new reels to check

ones more if its the reels. The nr 4 and 5 reel they DO turn, but they end up 1 (motor) step further then the rest after reset. After another reset they end up another step further ( so 2 steps past the centre position ).

Share this post


Link to post

Yeah the machine does know which pole of the stepper motor should be energised for the tab passing the sensor,  when it comes to feature reels ( which I presume 5 and 6 are) then they can be set totally different to the main 3 reels, again if this is wrong to what the software of the machine thinks it should be it will error

Share this post


Link to post

Your content will need to be approved by a moderator

Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×