Jump to content
Ikhlaq

Coins accepting not giving any credits

Recommended Posts

Hello again 

I've got an issue with my eachwaynudger mk2. It's taking the money but not giving any credits. I've swapped a working coin mech, checked all fuses in psu and the thngie between the coin tubes and reels. On start up on the credit screen it flashes 2, also it's not going into attraction mode and no £1 coin accepted is on even though coin tubes are full. It's missing reset switch which I swapped over with another board. Hope the info I've provided helps. If you need to ask anything else please say I've tried not having any luck.

All help appreciated thank you in advance 

20190211_183643.jpg

Edited by Ikhlaq
Added file and more info

Share this post


Link to post
Share on other sites
3 hours ago, fruitsnappa said:

Are your door switches operating correctly?

Good point I removed the door switches to avoid machine switching off and on. I'll do that and let you know back here

Share this post


Link to post
Share on other sites
11 hours ago, fruitsnappa said:

Are your door switches operating correctly?

I've reconnected switch wiring still no joy, normally when I switch machine on the credit display flashes the number 13 but now it's flashing 69. And the no £1 Coins allowed has gone off also.

Share this post


Link to post
Share on other sites

×