Search the Community
Showing results for tags 'help'.
-
I was clearing and old store room and found these. Are they psu? They are light which makes me think they are not
-
i have just copied a film file to DVD but when i play it back there is no sound on this dvd.the file is perfect when played tried the dvd in my tv and still no sound and also put a another dvd film in my computer and thats fine any help please
-
Hello Every1, I am not a complete newbie here, I had an account a while ago and was unable to use it... (or remember it ) You guys have always been fantastic in the past, now I got 2 more machines and problems (most of which have been fixed.... At the moment I am only concentrating on the PSYCHO CASH BEAST machine.... I have got the machine back to a working state, It powers up fine, loads fine, takes the credits.... then there's a problem... The machine just wont let you press start to play the machine, I have tried changing the button parts over etc but still no joy... I'm thinking this is probably 1 of 2 things..... 1) there should be a minimum amount of money in the machine before it will play (it has about £1.40 in it) 2) lose wire somewhere??? Please help guys. Many thanks Rob
-
Hi there, I am new to the scene so hopefully someone can point me in the right direction! I have recently purchased a Global Fruit Machine being Carry on Clubbin but the machine is not currently in a working order. I plug the machine in and power appears to reach the main power unit at the base of the machine - there are also various LED's that glow red inside the machine (Four on the main circuit board and one next to each reel all glowing red). However none of the front lights light up and there is nothing at all within the display screens. The reels fail to move also... After looking into it on the web it sounded as though the cause was most likely a dead battery which I have had replaced and re-soldered but this hasn't provide a solution. im not sure if the board itself has been coroded by the faulty battery? Am I on the right lines here? I have added some pictures to exaplin this better but if any of the boards need replacing i wouldnt know where to start looking for the parts. i have been searching on EBAY for replacement boards and spare manuals but Im unable to find anything for this machine? Any help would be brill!
-
Hello, I am new to this forum. I am 18 years old and live in The Netherlands. Since we went to the pinball hall of fame in Las Vegas me and my dad have a passion for pinball machines and arcade stuff. We have got 3 pinball machines, one arcade machine and a slot machine. Recently I bought 2 slot machines that weren't functioning for 20 euros. I thougt well maybe I can fix them. I have been reading your forums and it has been really helpfull. But now I am stuck at a point where I dont know what to do. It is a Barcrest machine. The name is 'Coin Shoot' and it has a MPU 3. This is what I did so far: When I plugged the power cord in only the TL lights turned on. No other lights or sound. Sometimes the display would show 00000000 but a lot of the times it would not show a thing. I could move the reels by my hand. I checked and replaced the fuses and I figured the MPU was broken. I took the MPU out and the battery leaked, and a condenser and transformer were missing. So I took the 100% working MPU3 out of my dads working slot machine (magic replay). I plugged it in my machine and turned the machine on. The TL lights turned on. All the other lights remained of. There was no sound. The hopper mechanism (not a hopper but a slide system) started to make a clicking noise. The message on the display said: ‘Coin peoeroud’ or something like that. This time the reels were stiff and I could not move them by hand. The noise didnt stop so I turned the machine off and back on. This time the ‘slider’ didnt make noise. The display showed two zero’s (00) at credits. I put coins in and they just came back out. At the back of the machine I triggered the coin mechanism by hand (so it would think i put in coins) and nothing happened. I turned the machine off. When I turned it on some weird symbols came up on the display. When I turned it on later it showed 2 zero’s again, but this time on the other side of the display. Then I discovered there was a wire loose. There was one wire sticking out of the white cable bundel. I uploaded the picture of this. I stuck the wire back in and a clicking noise came from somewhere near the transformator (correct word?). Nothing else happened. What should I do? The fuses are intact, the MPU is 100% working. Is the game itself (the ROM) broken? I am not really technical but I would like to learn some more and I would appreciate your help! I added a bunch of pictures for you to see whats going on. I can always make more just ask me. Thanks
-
hi guys new to this forum.. would really appreciate any help with my simpsons beer guide fruit machine. i can get the strim alarm to disable can this even be done. every time i try and collect any winnings the alarm goes off displays error strim alarm 1.9 the few moments later say iou and the cash amout . i have then have to turn the machine off and on. please help me thanks chris
-
hi guys new to this forum.. would really appreciate any help with my simpsons beer guide fruit machine. i can get the strim alarm to disable can this even be done. every time i try and collect any winnings the alarm goes off displays error strim alarm 1.9 the few moments later say iou and the cash amout . i have then have to turn the machine off and on. please help me thanks chris
-
i have a barcrest life a beach and it has a nv4 note acceptor loom is plug into it but the other end has two plugs were do you put them i have pictures thanks for your time
-
i am trying to get a fruit machine emulation to fit on my screen because i cant see reels or buttons resolution does not help me can some one help please i am ready to throw the thing in the bin
