Jump to content


Mecca Supporters 2019
  • Content Count

  • Donations

    15.00 GBP 
  • Joined

  • Last visited

  • Days Won


Everything posted by warlord

  1. warlord

    Glass reproduction and reprint

    Try andy backhouse,he has an advert on ebay,apparently he can do mirror surrounds
  2. warlord

    Jpm casino crazy

    Depends what tech its on,you might get one on ebay,If its 80s or early nineties then you might struggle.But if its been stored then deffo mpu.REMOVE BATTS FROM MPU AND FLY LEAD AWAY.never store a machine with battery in it.
  3. warlord

    Board not powering up

    Not sure on that board,never had one.If you know pinouts from psu check 5v there.maybe someone will know how to chevk board.
  4. warlord

    Maygay its a knockout

    Refurbed sides back on now as is reel glass and button pannel.Ordered some new black formica to make a new front pannel aswell.Also have all locks 4 in total on way.Coin chute removed for renovation and back now closes properly.Looks good but now i have a problem.See the glass reproduction thread i started.
  5. warlord

    Maygay its a knockout

    Machine delivered at 11.45 pm last night.Quick look and the board is much better than i was expecting.It even has the black pins holding mpu in and the black cover over the mpu.It has 2 tubes full of tokens and all generally ok inside.The main bad points are,top of cab has swelled a lot,but that should be relatively easy to sort and the back glass is quite bad with lots of flaking and peeling.Pics coming later today,if anyone has a spare glass please let me know
  6. warlord

    Who is ron ?

    Hope ron is ok,i sent a mech last week and he always messages me when he gets it,but ive not heard anything,and nessaged him yesterday and no reply.Bit weird.Anyone know if he is ok at all.
  7. warlord

    Board not powering up

    Firstly are you sure you have +5 volt to the board for the logic
  8. warlord

    bally handles

    You migtt get more luck on pennymachines forum dude
  9. warlord

    JPM IMPACT CPU drawings - fan made!

    That must have took some doing,Quite clever if you ask me and sharing all the hard work with us all.Excellent
  10. warlord

    Caster wheels on a machine

    Maygays do not have the hollow base underneath like sone others do.By this i mean a box under the machine surrounding the base usually 18mm thick and 2 inch high.So if castors were fitted it would only be about 10mm clear.Maygays do not have this,they have a strip of 18mm thick mdf front and back.So if you fit castors it will make it unstable and mske it 3 to 4 inch higher than it should be.In my opinion they are not supposed to have them so dont fit them
  11. warlord

    Mpu4 psu help

    These i believe consist of 4 diodes inside,so for eg top right dc pos,bottom left dc neg.The other opposing 2 will be ac marked with wavey sign like letter s on its side
  12. warlord

    Impact Las vegas

    Bargain.Will be good to see it fixed
  13. warlord

    Fruit machines

    Still take it off as it can be used to gamble Even old machines that dont take legal tender are not permitted.
  14. warlord

    Fruit machines

    Facebook market place or shpock,or buy a licenece and fleabay them
  15. warlord

    Maygay its a knockout

    excellent work mick,very skillfull.Quick update,the top is now refitted and all 10 pilot holes lined up with the internal brackets.A quick clean inside and new bulbs in button assemblies.Now to make the back close.Monday should see the refurbed button pannel and reel glass being refitted.Oh yes,im also removing payout tray now for work.
  16. warlord

    Maygay its a knockout

    Many thanks,a lot of work done,more to do and soon bits can go back on.
  17. warlord

    Maygay its a knockout

    Great job mick.yes woodwork is my thing.Restored and built many cabs over the years.I also have new edge trim for glass but its 15mm wide so i will trim it to about 8mm.to match original.Im putting right 12 years of bad neglect.Think its the worst one ive ever had,but its worth saving and its loved again.
  18. warlord

    Maygay its a knockout

    mick,you are a star.Top pannel remade today,I have copied exact original.I have laminated the top and the rest will be painted black.Even done all pilot holes for what mounts inside but maybe you cant see them.Need to get some 8mm dowels now.
  19. warlord

    fruit machine

    Yea,not really sure why,i can understand a working board getting money.Maybe you should dig yours out.It will help fund your gadgets
  20. warlord

    Who is ron ?

    Do they just let you out at weekends dude.Not knowing ron is as likely as not having a mobile phone
  21. warlord

    manual scorpion 2

    To get into that section yes you do.
  22. warlord

    Maygay its a knockout

    Thanks mick,i thought that was new desolderer you bought recently.if i were you i would bolt it down.No rush dude
  23. warlord

    Maygay its a knockout

    Thanks matt,very kind offer.all is well so far,will have a go at new top pannel friday
  24. warlord

    Maygay its a knockout

    For metal i use plasticote primer and satin black.for paint brushing like cabinet sides i use wilko satin black.
  25. warlord

    bellfruit electro

    That looks nice.